How to Install and Use the Easel?

Now more and more parents will let their children learn to draw, cultivate their children’s aesthetics, and cultivate their sentiments, so learning to draw is inseparable from having a 3 In 1 Art Easel. Next, let’s talk about how to install and use the 3 In 1 Art Easel.

How to install the Double Sided Easel?

1. Open the packing bag of the Double Sided Easel

You need to take out two parts in the bag, one is the folded support and the other is the thin steel bar. The inner bracket can be retracted, and the steel plate is stuck under the bracket.

2. Lengthen the three corners of the bracket

After stretching, while opening the plastic mouth, each small support has a buckle, which can pull the two plastic bayonets open and stretch them to the outside until they can’t be stretched.

3. Place a thin steel bar

Because thin steel bars are used to lower the center of gravity. Clamp the steel bar on the screw nut of the two “support legs”. There are many holes on the steel bar, which is similar to the shape of a gourd. The holes are large and then go in through the screw nut. Two holes on the steel bar can also be selected according to the actual situation.

4. Put the painting on the upper part of the “support leg” to determine the position of the painting

After confirmation, pull the “support leg”, and there is a “support head” left in the middle, which is used to fix the painting. It is also decided to stretch the length of the “support head” to make a basic prediction.

5. Stretch the “bracket head” to the height required to fix the painting

There is a plastic buckle in the middle of the support. Open the buckle, pull it up and close the buckle to fix it, so that the “support head” will not slide down. There is also a buckle on the top of the “support head”, which needs to be closed. This can ensure that the drawing paper will not fall.

6. Adjust the angle of the support to increase the stability of the support

Only three “support legs” of the support are in contact with the ground, so the position of the support foot and the hole of the thin steel strip can be adjusted to increase the stability. Then determine whether the painting is stable. If it is unstable, you can adjust the “support head” on the top. In that case, it’s OK to have a strong wind.

How to use the Double Sided Easel?

1. Use steps of the easel: first, install the metal bottom support strip with eyes into the two legs with screws; Then open the fixed frame of the top pull rod, pull the upper pull rod apart, and insert the bottom of the pull rod behind the bottom side support strip; Then open the clip at the top of the pull rod, adjust the height according to the size of the drawing board, clamp and lock it. Note that if there is a rope, it needs to be pulled up and fixed to the rear leg.

2. The Cheap Table Easels used in the studio are generally fixed on a square or rectangular base by four hard wooden strips. The base is equipped with foot wheels, with two solid supporting rods crossing at the top, diagonal pillars in the middle of the back, and an adjustable sliding groove. The spring hook of the utility model can be fixed in sections and supports the painting works, and a movable clip is arranged on the top to fix it.

3. The sketching Cheap Table Easel is made of wood or aluminum, with small volume, is lightweight, and easy to carry. All accessories can be folded into a dense volume. Its design is stable and portable. The more common sketch 3 In 1 Art Easel has three legs, two of which are in the front to support the pillar of the painting, and the third leg is tilted and extended backward to adjust the angle of the drawing board or canvas.